MC1.2KW Power Amplifier Specifications

POWER OUTPUT

1200 watts into an 8, 4 or 2 ohm load is the minimum sine wave continuous average power output.



OUTPUT LOAD IMPEDANCE

Terminals for 8, 4 and 2 ohms



RATED POWER BAND

20Hz to 20kHz



TOTAL HARMONIC DISTORTION

0.005% maximum harmonic distortion at any level from 250 milliwatts to rated power output.



DYNAMIC HEADROOM

2dB



FREQUENCY RESPONSE

+0, -0.25dB from 20Hz to 20kHz

+0, -3.0dB from 10Hz to 100kHz



INPUT SENSITIVITY

2.5V Unbalanced, 5V Balanced



A-WEIGHTED SIGNAL-TO-NOISE RATIO

120 below rated output, Unbalanced

124dB below rated output, Balanced



INTERMODULATION DISTORTION

0.005% maximum if instantaneous peak power output does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20kHz



WIDE BAND DAMPING FACTOR

Greater than 40



INPUT IMPEDANCE

10,000 ohms



POWER GUARD

Less than 2% THD with 14dB overdrive



POWER REQUIREMENT

100 volts, 50/60Hz, 13 amps

110 volts, 50/60Hz, 12 amps

120 volts, 50/60Hz, 12 amps

220 volts, 50/60Hz, 7.5 amps

230 volts, 50/60Hz, 6.5 amps

240 volts, 50/60Hz, 6.5 amps

Standby: 0.5 watts



Overall Dimensions (H x W x D) Including feet and cables

2-5/16 inches (31.27cm) x 17-3/4 inches (45.09cm) x 22 inches (55.88cm)



Weight

147 pounds (66.7 kg) net

172 pounds (78.0 kg) in shipping carton